Home > News > Content
Bimetal Bearing High Load Conditions
Aug 11, 2017

bimetal bearing high load conditions
Bimetal bearings are designed for rotary or moving parts that are difficult to lubricate or develop and develop a new type of sliding bearing lubrication conditions. bimetal bearings, especially suitable for medium and low speed, high load conditions.
bimetal bearing advantages As we all know that all the mechanical operation must have a certain impact.
bimetal bearings are a kind of metal bearing characteristics and novel features, bearing lubricated bearings, made of metal substrate loading, solid lubricating materials for special lubricants. It is particularly suitable for heavy duty, low speed, reciprocating or swinging, such as lubrication and oil film is difficult to form, not afraid of water, and other acid etching and washing (such as high resistance, high impact resistance, high resistance to high temperature, self-lubricating properties The Customers generally reflect the embedded bearings not only energy saving, building energy efficiency, its longer life than ordinary plain bearings. Products are widely used in metallurgical continuous casting machine, in the production line rolling equipment, mining machinery, ships, steam turbines, turbines, injection molding machines and equipment.
Bimetal bearing retainers and sealing plates must not be effective. Use hammers and bushings to install methods commonly used as a way to damage the bearings, so do not hit them directly. Be sure to get in the general case, set in the middle and in the beat. Should hammer. On the mechanical structure, the inner and outer rings when you are tightly using the pad, make sure the power supply can be added to the inside and the outer ring is pressed. Only in the inner AB pressure ball between the effect and into the outer ring, therefore, will lead to scratches of the orbital plane. To the edge of the bearings on the shaft, clean oil, heated to 80 to 90 degrees bearing, diameter expansion method to install, widely used.
bimetal bearing is a combination of metal bearing characteristics and non-oil lubricated bearing characteristics of the new lubricating bearings, from the metal matrix to withstand the load, the special formula of solid lubricating material from the lubrication.
In order to avoid bumps during storage, a small amount of lubricant should be applied to the surface of the shaft and shaft housing. To install the bearing in the shaft when the inner ring in the force, to install the bearing in the bearing shell, the force in the outer ring. To force the bearing force, be sure to pay attention to the power of the vertical and uniform, the side will hit the bearing injury. To avoid this,
Bimetal bearing bearing retainer and sealing plate is also absolutely no force. The use of hammer and casing installation method is generally used method, because it will damage the bearings, so do not directly beat. Be sure to figure in the general, so that the sleeve in the middle and beat into it. The hammer should be tapped lightly. In the mechanical structure, the inner and outer rings are tight fit, should use the pad, be sure to force the same time added to the inside and outside the ring into it. If only in the inner ring after the pressure into the force, the force will be forced into the outer ring ball, therefore, will cause scratches in the track surface. To the bearing with a large margin on the shaft, in the clean oil, the bearing heated to 80 to 90 degrees, so that the expansion of the diameter to install the method, is widely used.
Bimetal bearing advantages As we all know, all the smooth operation of the machinery must use some kind of bearing.
bimetal bearing is a combination of metal bearing characteristics and non-oil lubricated bearing characteristics of the new lubricating bearings, from the metal matrix to withstand the load, the special formula of solid lubricating material from the lubrication.
It has the characteristics of high carrying capacity, impact resistance, high temperature resistance and high self-lubricating ability. It is especially suitable for occasions such as heavy load, low speed, reciprocating or swinging and so difficult to lubricate and form oil film, and is not afraid of water erosion and other acid And scouring. The majority of users generally reflect the inlaid bearings not only fuel-efficient, energy saving, and its working life than ordinary sliding bearings long.
bimetal bearings This product is made of steel plate as the matrix, the middle layer sintered spherical bronze powder, surface rolled polytetrafluoroethylene and lead mixture made. It has a small coefficient of friction, wear and corrosion resistance. Oil-free self-lubricating and long service life characteristics, use it can reduce costs, reduce noise, prevent sticky, slippery.
bimetal bearing is a combination of metal bearing characteristics and non-oil lubricated bearing characteristics of the new lubricating bearings, from the metal matrix to withstand the load, the special formula of solid lubricating material from the lubrication.
Due to the requirements of the production process, some of the key equipment of industrial and mining enterprises in extremely harsh conditions to run. As the equipment heavy, high ambient temperature, dust or air containing acidic corrosive gases CO, SO2, etc., the equipment lubrication to bring a lot of problems, serious friction and wear.

Products List